small palm oil press with low oil residual

shandong leader machinery Co.,ltd. Relying on strong technical support, advanced production equipment, sophisticated processing technoloLD and scientific detection means to ensure product quality and delivery time, and in accordance with your requirements to provide a fully optimized technical solutions. Our international business scope includes customers from all over the world. We have competitive prices, with excellent after-sales service is proud.
As a trustworthy international trading company, shandong leader machinery Co.,ltd. Not only provide high-quality microwave drying sterilization equipment, customized turnkey solution is one-stop service. Procurement advice, floor plans, operational training and life-long free technical support are provided by our professional and technical personnel.

HHHAAS

Specifications

small palm oil press
1, high performance
2, easy operation
3, save enerLD
4, CE,BV&ISO9001:2008

small palm oil press with low oil residual

Reception station:

A, The FFB bunch be transported to plant by truck, after be weigLDed by weigLDing bridge, the FFB will be loaded down to FFB Loading Ramp.

B, The iron door of unloading ramp is controlled by hydraulic device, Get the power from Hydraulic pump station. Start on the hydraulic device, iron door be lifted. FFB will fall down to the Palm Fruit screw conveyor, be transported to pre-treatment plant, to Vertical sterilizer.

Sterilizing process:

A, By Scraper Conveyor, FFB be transported to the top of sterilizing tank. Falling into sterilizing tank from feed inlet.

B, Sterilizing tank: The inside diameter of sterilizing tank is φ2000mm, length 12500mm, welded up by Q235B material (Chemical composition:C0.12~0.2%,Si0.12~0.3%,Mm0.3~0.7%,P

C, After FFB be transported into sterilizing tank (202), close the door of sterilizing tank, and open the vent valve behind the tank, then saturated steam, which pressure is 3bar and temperature is about 130°C. After all the cooling air have been discharged out,close vent valve, proceed to sterilizing section. Sterilizing time is 55~60minutes.

D, The time of sterilizing is also according the kind of FFB, if the pressure is too high or the time is too long , palm fruit will be rot, also Resulting in the loss of oil, high temperature can change palm color.

E, Finish sterilizing process, close the steam valve, open the valve lead to Blow-off/down Silencer, can’t open the sterilizing tank door until discharges out all steam and water.

F, Open the sterilizing tank door, sterilized FFB will fall on the FFB Scraper conveyor. Be transported to next station.

Threshing station:

A, The sterilized FFB will be transport to thresher platform by scraper conveyor.

B, We adopt advanced Drum type thresher, insider diameter is φ1800mm, length is 5000mm.The material of main shaft is #45 steel (main chemical composition is C0.42~0.50%, Si0.17~0.37%, Mm0.50~0.30%, P≤0.035%, S≤0.035%, Cr≤0.25%, Ni≤0.25%, Cu≤0.025%).

C, Sterilized FFB be twisted and knocked in thresher. Palm fruit will be separated from empty bunch totally, fall on Fruit Scraper conveyor though fence, the empty bunch will be transported to Bunch Temporary tank by Bunch Scraper conveyor.

small palm oil press:

A, The palm fruit is transported to Crush tank (401) by fruit elevator.

B, The fruit in crush tank will be heated to 90~95°C, crush time is 10~20 minutes.

C, The pounded fruit flow into Palm fruit oil presser(402) to press. Oil press cone can control cLDinder, working pressure is 50~70bar, revolving speed of presser main shaft is 12.5 r/min. Meanwhile the mixture of crude palm oil and water outflow from barrel holes. Crude oil will be flow in Temporary Storage oil tank(T06) through crude oil groove. Then oil will be pumped to Screening filter(601) by oil pump. After filtering take out the oil foam, deposit impurities. Palm oil flow into Passivating oil tank(602). The fiber cake and nucleus are exhausted from clearance of cone head drop on Breaking cake auger (501).

D, Palm fruit oil presser (402), the material of main shaft is 40Cr steel, (Chemical component: C0.37~0.44%,Si0.17~0.37%, Mn0.50~0.80%,Cr0.80~1.10%) have been thermal refining, the material of worm and cone head is 45# Cast-Steel, and the surface have quenching treatment.

Kernel recovery system:

Sewage treatment:

Our Factory Certificates:

Our Warm Professional Advice:

If you like our products,please kindly tell us your requirements,includes raw material name ,your processing capacity per day, have the production plant or not and related data, then we can efficiently make a cost-effective plan for you, we can calculate the cost and profit for you. Your trust and support are our large success.

small palm oil press with low oil residual produced and supplied by shandong leader machinery Co.,Ltd.
Oilseeds Processing Line is the synthetical process of physical and chemical procedure. In the procedure, accompaniment of oil is selectively acted by small palm oil press with low oil residual , small palm oil press with low oil residual makes the combination of impurities and oil be weakened, and separates the impurities from the oil. There are three kinds of crafts, small palm oil press with low oil residual are continuous refining process, semi-continuous refining process, intermittent refining process. and included the following small palm oil press with low oil residual: degumming tank, nentralizing tank, centrifuge, heat exchanger, decolorization tower, dedorization tower, etc

HBFJHBJHS
Specific description of small palm oil press with low oil residual
1.Neutralization Tank of small palm oil press with low oil residual: used for acid refining, alkali refining or washing.
2. Bleaching Tank: used for bleaching oil&removing pigment.
3. Deodorizing Tank: used for removing the odour of oil (made of stainless steel).
4.Conduction Oil Furnace: provide production with heat source, and the temperature can reach 280 °C.
5. Vacuum Pump of Oilseeds Processing Line : provide vacuum degree for bleaching & deodorizing process, which can reach above755 mmHg
6.Air Compressor: weather bleaching earth used in the bleaching process
7. Filter Press: filtrate the bleaching earth
8.Steam Generator of Oilseeds Processing Line : produce steam for deodorization and distillation process
9. Leaf Filter of small palm oil press with low oil residual: filtrate the bleaching earth & impurities.

JHBJLDBC

MAX-LEADER

TEL : +86 -15315573781（also Whatsapp）

Email：INFO@LDFOODMACHINE.COM

Website:www.sportscarcup.com

We believe that whatever the field is, quality has always been at the heart of the company’s performance. We treat quality and service as a way of life and hope to serve you in the best possible manner on a long term and mutually beneficial basis. If you want to know more information please contact us. Our responsible, experienced technical team is always ready to serve and guide you at any time.