Automatic Sunflower Seed Oil Refining Machine

shandong leader machinery Co.,ltd. Relying on strong technical support, advanced production equipment, sophisticated processing technoloLD and scientific detection means to ensure product quality and delivery time, and in accordance with your requirements to provide a fully optimized technical solutions. Our international business scope includes customers from all over the world. We have competitive prices, with excellent after-sales service is proud.
As a trustworthy international trading company, shandong leader machinery Co.,ltd. Not only provide high-quality microwave drying sterilization equipment, customized turnkey solution is one-stop service. Procurement advice, floor plans, operational training and life-long free technical support are provided by our professional and technical personnel.

HHHAAS

Specifications

Sunflower Seed Oil Refining Machine
1.High oil quality equals to EU standard;
2.Stainless,carbonless steel;
3.CE,ISO

Automatic Sunflower Seed Oil Refining Machine

1.Characteristics:

This units belongs to intermittent refining oil equipment, has all functions

of large, small scale intermittent refining equipment, and better than them.

This equipment can produce high-cooking oil or salad oil.

This units complete set combined, self-prepare heat source, gas source, electrics control. LigLD weigLD, save electricity , convenient use, this machine do not need special basis, either indoor or outdoor is OK, just need to make up power source, water, prepare coal, alkali, P-acid, active clay, edible salt and other consume materials.

2. Units devices:

(1). Refining pot: used to P-acid de-gumming, alkali refining de-acid and

water rinsing.(2).De-color pot: used to remove off pigments, bleaching oils and grease de-

hydrate.

(3).De-odor pot: used to remove off oils odor, foreign smells (stainless made)

Heat-transfer oil stove: supply each device production needing heat enerLD, temperature reach above 280 ° C.

(4).Steam generator: produce the needing steam for de-odoring and distillation.

(5).Vacuum pump: supply needing vacuum for dehydrate, de-color, de-odor. Vacuum degree can reach above 755mmHg.(6).Press filter: filter clay, filter out clear oil.

(7).Air compressor: blow dry bleached clay, blow empty the leftover oil in

the press filter.

3.Main refining process:

(1).P-acid degumming operation

Drawing the filtered or settled crude oil into the neutral pot, control oil te-

mperature 40 ° C, liquid level cover the neutral pot volume about 80 %.Add

into the neutral pot P-acid with 85% concentration, 0.1-0.2% oil weigLD.Start

up neutral pot, make main shalf stirring at 60-70 r/min, finish de-gumming

in 30 min.

(2)alkali de-acid operation

After finish de-gumming process, at once add into lye carrying alkali refini-

ng de-acid, lye concentration 16 ° Be ′, super alkali is 0.1-0.3% oil weigLD, afterfinish adding, continuous stirring 30min, when soap particles accumulated condensing, should reduce stirring speed, 30r/min avoid emulsion.

After adding alkali, gradually rising temp to the end temp 65 ° C, see to th-

at the rising temp speed should control at 1 degree per minute, not too fast.

Shut off neutral pot drive part, the oil settled in the pot 6-8 hours, make oil separate from soap.

(3)water rinse operation

Adjust the neutral pot oil temp to about 85 ° C, add into hot water whose

temp higher oil temp 10-15° C, the water use amount each time is 10-15% oil weigLD.

Start neutral pot drive part, make the main shalf stirring washing at 30r/m-

in, make the oil and water fully contact, stirring time 5-10 min.

If oil/soap separate not ideal, the oil contains relative high left soap, the fir-

st time washing, better to use thin salt water evenly spray into oil.

(4).De-watering

Start vacuum machine, open the vacuum valve on the de-color pot, make

the pot inside vacuum above 750mmHg , inhale the clear oil after water rin-

se into the de-color pot.

Start up de-color pot main axis, stirring at 30r/min, and make the pot inside oil temp reach 90 - 95 ° C, carrying vacuum dry hydrate, about 30 min, no frog in the pot, indicate that the dehydrate finished.

(5).de-coloring

After dehydrate, inhale 3-5% oil weigLD active clay into the de-color pot to

carry absorb de-coloring.

De-color pot main axis stirring speed 60r/min, time 20 min, vacuum degr-

ee 750mmHg, is the whole absorb de-color craft process requirement.

Shut off vacuum valve, open vacuum break valve, stirring non-stop, reduce

the oil temp down to 70 ° C, the de-color finished.

Continuous stirring, open oil outlet valve, press the de-color oil into the pre-

ss filter, filter away waste clay, the last use air compressor blow clean and dry

(6).De-odor operation

Open the vacuum valve, make the pot inside vacuum degree gradually reach above 750mmHg.

Inhale the de-color oil after filter into the de-odor pot, see to that oil amount should cover the pot volume 60%.Control oil temp at 240 ° C - 260 ° C, use thedirect steam under 0.1 -0.3Mpa to distillate 3-4 hours.Shut off steam, shut off

heat source, when the oil temp cooling to below80 ° C, shut off vacuum, re-

lease de-odor oil , the de-odor process has finished.

Until now, the product oil after de-odor is high cooking oil, there are some

factories carrying again one time fine filtering after de-odor to increase the o-il qulity.

The salad oil refining process is same to the high-cooking oil refining process, just has a little higher requirements in each section, for example, during alkali refining, the super amount alkali a little much, when de-coloring, the bleaching agent much, de-odor time properly longer, the temp relatively higher, add one fine filtering section.

Type	oil refinery equipment
Crude oil	Sunflower oil, sesame oil, cotton seed oil, peanut oil, rice bran oil, palm oil, coconut oil, soybean oil, rapeseed oil, mustard seed oil, etc.
Grade	First grade oil, it is the salad oil . Second oil, it is senior cooking oil.
Description	Main flow chat : 1. Crude oil 2. Neutralize 3. Degumming 4. Decolorize / bleaching a 5. Deodorize 6. Dewaxing /cool 7. Refined oil
Package	40ft container * 4 Pcs or 5Pcs
Material	Stainless steel and carbon steel

Note: We have the different oil mill factory for the visit and supply for the turn-key

project now and then.

Automatic Sunflower Seed Oil Refining Machine produced and supplied by shandong leader machinery Co.,Ltd.
Oilseeds Processing Line is the synthetical process of physical and chemical procedure. In the procedure, accompaniment of oil is selectively acted by Automatic Sunflower Seed Oil Refining Machine , Automatic Sunflower Seed Oil Refining Machine makes the combination of impurities and oil be weakened, and separates the impurities from the oil. There are three kinds of crafts, Automatic Sunflower Seed Oil Refining Machine are continuous refining process, semi-continuous refining process, intermittent refining process. and included the following Automatic Sunflower Seed Oil Refining Machine: degumming tank, nentralizing tank, centrifuge, heat exchanger, decolorization tower, dedorization tower, etc

HBFJHBJHS
Specific description of Automatic Sunflower Seed Oil Refining Machine
1.Neutralization Tank of Automatic Sunflower Seed Oil Refining Machine: used for acid refining, alkali refining or washing.
2. Bleaching Tank: used for bleaching oil&removing pigment.
3. Deodorizing Tank: used for removing the odour of oil (made of stainless steel).
4.Conduction Oil Furnace: provide production with heat source, and the temperature can reach 280 °C.
5. Vacuum Pump of Oilseeds Processing Line : provide vacuum degree for bleaching & deodorizing process, which can reach above755 mmHg
6.Air Compressor: weather bleaching earth used in the bleaching process
7. Filter Press: filtrate the bleaching earth
8.Steam Generator of Oilseeds Processing Line : produce steam for deodorization and distillation process
9. Leaf Filter of Automatic Sunflower Seed Oil Refining Machine: filtrate the bleaching earth & impurities.

JHBJLDBC

MAX-LEADER

TEL : +86 -15315573781（also Whatsapp）

Email：INFO@LDFOODMACHINE.COM

Website:www.sportscarcup.com

We believe that whatever the field is, quality has always been at the heart of the company’s performance. We treat quality and service as a way of life and hope to serve you in the best possible manner on a long term and mutually beneficial basis. If you want to know more information please contact us. Our responsible, experienced technical team is always ready to serve and guide you at any time.