Full automatic groundnut oil mill production machine

shandong leader machinery Co.,Ltd.is an international trading company. In the industrial fields,we have 20 years' experience of refining equipment supporting and industrial service. And we also have 25 years' experience of researching & manufacturing industrial microwave equipment for food/chemical products/medicine sterilizing and drying. Our machines are highly automatic, environmentally friendly and enerLD-saving. We have more than 200 national intellectual property patents.shandong leader machinery Co.,Ltd. has the experience and equipment to develop effective solutions across all industries and our products can be found worldwide.

Full automatic groundnut oil mill production machine

Groundnut oil mill line:

Groundnut oil milling machine include pretreatment,extraction and refining and dewaxing.

About the first stage of ground oil milling is ground oil pretreatment:

Groundnut→Cleaning→ Hulling→ Separate Shell and Kernel→ Soften→Flaking→Cooking→Pressing

→Crude Oil

Groundnut oil mill screw press type:

Groundnut oil mill for many crops:

The main process of groundnut oil mill process:

1.Cleaning

In order to obtain high effective cleaning, ensure good work condition and production stability, high efficient

vibration screen was used in the process to separate big and small impurity. Suction type gravity stoner removing

machine was applied to remove the shoulder stone and earth, and magnetic separation equipment without power

and exhaust system were used to remove iron. Dust removing wind net is installed.

Destoner

2.Dehulling

Put the raw material into the two discs.The relative movement between the two discs,the insection on the disc

surface make kneading function of the material hull,then make the hull fall down.Separate the shell and kernel.

3.Softening

Adjusting the moisture and temperature , so that increase the oilseed plasticity,reduce powder when flaking and

sticky roller, in order to ensure the quality of the flakes. conditioning can also reduce the vibration of the

machine when flaking roll wear, in order to facilitate the flaking operate normally.

4.Flaking

Flaking means a certainty granularity of soy lamella was prepared for flaked of about 0.3 mm, the oil of raw material can be extracted in the shortest time and maximum, and residual oil was less than 1%. the thickness is uniform,moderate size, no out oil,less powder,and with a certain degree of mechanical strength.The fuel cell wall damaged,then shorten the oil discharged from the oil seed away.

5.Cooking

Put the material into the toaster,the mixing blade is with continuous turning driven by the reducer.

The toaster is with interlayer design, heating media is hot conducting oil or steam, thus keep

the flaking temperature stable.

6.Pressing

This is the oil out process, the soybean flake will be sent to oil press machine through the screw conveyor.

After pressing, we can get the crude cottoen oil.

Advantages of our groundnut oil mill :

1. Widely used to press various kind of oil materials such as sunflower seeds, baobab

seeds, neem seeds, sesame, peanut, sunflower seeds,rapeseeds, mustard, castorseeds, copra

kernels,palm, coconut, walnuts, soybean, cotton seeds as well as rice bran, etc.

2. It can save your labour and cost: only 1-2 people can finish the product; saved

the labour by 50%.

3. EnerLD saved: it w ill save the enerLD by 40% compared with the other ones.

4. Small land-covering: only 10-20 square meters can meet the need;

5. The oil residual rate is less than 6.5%. The cake thickness can be adjusted as you

requested.

6. It is easy to operate. When operating, you should follow the instructions strictly.

7. This machine is well sold in African countries. It is well matched in the small-medium sized oil plant.

We have the good service and customers:

Full automatic groundnut oil mill production machine produced and supplied by shandong leader machinery Co.,Ltd.
Crude Oil Refining Machine can be used in black engine oil,Crude oil and plastic oil, etc, by distilled catalyst to get gasoline and diesel oil. The waste oil pump into the distillation of Crude Oil Refining Machine , through the coal (or fuel oil) heating to working temperature, the maximum working temperature by Full automatic groundnut oil mill production machine is the 410 degree and the required gasoline and diesel oil can be obtained after catalytic distillation. When the reaction of waste oil in reactor of Full automatic groundnut oil mill production machine is complete, stop heating, and remove residue from the tank of bottom, then Crude Oil Refining Machine can be used by Full automatic groundnut oil mill production machine again.

MAX-LEADER

TEL : +86 -15315573781（also Whatsapp）

Email：[email protected]

Website:www.sportscarcup.com

We believe that whatever the field is, quality has always been at the heart of the company’s performance. We treat quality and service as a way of life and hope to serve you in the best possible manner on a long term and mutually beneficial basis. If you want to know more information please contact us. Our responsible, experienced technical team is always ready to serve and guide you at any time.