microwave drying equipment for Manganese carbonate

Specifications

FEATURES:
1 chemical products LD/sterilizer
2 save enerLD /efficient
3 easy to control
4 cover less area

JN-100 Chemical Microwave Drying equipment

Wide application:

The field of applied chemical powder and granular, liquid, paste, paste and other materials, heating, drying, catalytic process. Compared with conventional methods, characterized by speed, time is short, high efficiency, low enerLD consumption, drying thoroughly, can be dried to moisture content of 0.01%. Microwave can penetrate materials for direct heating, the material in the polar molecules under the action of the microwave field speed vibration, increased the activation enerLD of chemical reaction, enhance the response speed. Catalytic heating speed, high efficiency.

For example: aluminum chloride, aluminum hydroxide, alumina, aluminum phosphate, aluminum silicate, aluminum sulfate, ammonium chloride, ammonium molybdate, ammonium nitrate, ammonium phosphate, ammonium sulfate,

ANC catalyst, antimony sulfide, arsenic, chlorine of barium, barium hydroxide, barium sulfate, bauxite waste, bismuth nitrate, borax, boric acid, calcium carbonate, calcium chloride, calcium hydroxide, calcium phosphate, calcium propionate, calcium silicate, calcium sulfate, catalyst, cement (raw material), the second chromium oxide, chromium sulfate, cobalt sulfide, copper oxychloride, copper sulfate, copper sulfide, cryolite, copper oxide, mortar floating mineral, graphite, iron oxide, kaolin, lithium chloride, lithopone , magnesium aluminum silicate, magnesium hydroxide, manganese carbonate, manganese oxide, molybdenum disulfide, nickel carbonate, nickel hydroxide, nickel sulfide,

potassium bicarbonate, potassium carbonate, potassium chlorate, peroxide of magnesium, potassium nitrate, potassium permanganate persulfate, potassium phosphate, silica, antimony sodium, sodium bicarbonate, sodium dichromate, sodium chlorate, sodium chromate, sodium cyanide, sodium bisulfate, sodium sulfur Asia, sodium hypochlorite, sodium phosphate, silicon Sodium, Sodium Aluminosilicate, sodium fluoride, sodium sulfate, three sulfate, carbonate, thorium, titanium tetrachloride, uranium dichloride, etc.,

the water content from 20% to 0.5% after drying, drying time is only take 6 to 15 minutes, the drying temperature can be controlled in 80 °C ~ 90 °C.

Technical Parameters:

1 Type Size:JN-100
2 microwave output power: ≤ 100KW (adjustable)
3 input apparent power: ≤ 140KVA
4 Device Operating Voltage: Three-phase 380V ± 10%
5 Microwave frequency: 2450MHZ ± 50HZ
6 Microwave Leakage: GB ≤ 5mw/cm2
7 working environment: -5 ~ 45 °C, relative humidity ≤ 80%
8 around the non-corrosive gases, conductive dust and explosive gases
9 Capacity: 1300kg / hour (from dry to 10% moisture content 1% -2%)
10 expected out of high: 60 mm (adjustable)
11 transmission with speed :0.5-10m / min
12 dehydration rate: ≥ 100kg / h

Features:

1. The equipment use of advanced production technoloLD,adopt Panasonic magnetron,long life,LD effect;

2. Adopt 316# stainless steel,compact structure,no enerLD dissipation,save enerLD;

3. Tunnel type design,fast drying,cover small area;

4. Equipment safety:accord with GB-5226Electrical safety standard;

5. Drying and sterilizing simultaneously,multifunction;

6. Control system:PLC control interface or the press-button control

If you are interested in our microwave equipment,please feel free to contact me!

linda

Skype:linda.fu5

MAX-LEADER

TEL : +86 -15315573781（also Whatsapp）

Email：INFO@LDFOODMACHINE.COM

Website:www.sportscarcup.com

We believe that whatever the field is, quality has always been at the heart of the company’s performance. We treat quality and service as a way of life and hope to serve you in the best possible manner on a long term and mutually beneficial basis. If you want to know more information please contact us. Our responsible, experienced technical team is always ready to serve and guide you at any time.