2015 Newest Groundnut/vegetable/soybean Oil Manufacturing Process

Shandong Leader Machinery Co.,Ltd.is an international trading company. In the industrial fields,we have 20 years' experience of refining equipment supporting and industrial service. And we also have 25 years' experience of researching & manufacturing industrial microwave equipment for food/chemical products/medicine sterilizing and drying. Our machines are highly automatic, environmentally friendly and enerLD-saving. We have more than 200 national intellectual property patents.Shandong Leader Machinery Co.,Ltd. has the experience and equipment to develop effective solutions across all industries and our products can be found worldwide.

2015 Newest Groundnut/vegetable/soybean Oil Manufacturing Process

Sales manager:Annie

Tel:+8615237168511

Skype:goldpenguin9713

Our main business:

The technoloLD of our company for pretreatment and pre-pressing which mainly include the cleaning,extrusion,flaking,decrustation and pre-pressing and so on,Considering the different characteristic of oil seeds and the customer requirments,we can provide you the special design,in order to adjust the oilseed to optimum sate,which will improve the oil yield and oil and cake quality,and cake quality,can provide the LD raw materials for the following section.

Groundnut oil manufacturing process machine

Raw material→Cleaning→ Hulling→ Separate Shell and Kernel→ Soften→Flaking→Cooking→Pressing

→Crude Oil

The main groundnut oil manufacturing process oil expeller:

1.Cleaning

In order to obtain high effective cleaning, ensure good work condition and production stability, high efficient

vibration screen was used in the process to separate big and small impurity. Suction type gravity stoner removing

machine was applied to remove the shoulder stone and earth, and magnetic separation equipment without power

and exhaust system were used to remove iron. Dust removing wind net is installed.

2.Dehulling

Put the raw material into the two discs.The relative movement between the two discs,the insection on the disc

surface make kneading function of the material hull,then make the hull fall down.Separate the shell and kernel.

3.Softening

Adjusting the moisture and temperature , so that increase the oilseed plasticity,reduce powder when flaking and

sticky roller, in order to ensure the quality of the flakes. conditioning can also reduce the vibration of the machine

when flaking roll wear, in order to facilitate the flaking operate normally.

4.Flaking

Flaking means a certainty granularity of soy lamella was prepared for flaked of about 0.3 mm, the oil of raw material

can be extracted in the shortest time and maximum, and residual oil was less than 1%. the thickness is uniform,

moderate size, no out oil,less powder,and with a certain degree of mechanical strength.The fuel cell wall damaged,

then shorten the oil discharged from the oil seed away.

5.Cooking

Put the material into the toaster,the mixing blade is with continuous turning driven by the reducer.

The toaster is with interlayer design, heating media is hot conducting oil or steam, thus keep

the flaking temperature stable.

2015 Newest Groundnut/vegetable/soybean Oil Manufacturing Process produced and supplied by Shandong Leader Machinery Co.,Ltd.
Crude Oil Refining Machine can be used in black engine oil,Crude oil and plastic oil, etc, by distilled catalyst to get gasoline and diesel oil. The waste oil pump into the distillation of Crude Oil Refining Machine , through the coal (or fuel oil) heating to working temperature, the maximum working temperature by 2015 Newest Groundnut/vegetable/soybean Oil Manufacturing Process is the 410 degree and the required gasoline and diesel oil can be obtained after catalytic distillation. When the reaction of waste oil in reactor of 2015 Newest Groundnut/vegetable/soybean Oil Manufacturing Process is complete, stop heating, and remove residue from the tank of bottom, then Crude Oil Refining Machine can be used by 2015 Newest Groundnut/vegetable/soybean Oil Manufacturing Process again.

Shandong Leader Machinery Co.,Ltd.

Skype： Zoe01262018

TEL : +86 -15106913958 （also Whatsapp）

Email：SALES8@LDFOODMACHINE.COM

Website:www.sportscarcup.com

We believe that whatever the field is, quality has always been at the heart of the company’s performance. We treat quality and service as a way of life and hope to serve you in the best possible manner on a long term and mutually beneficial basis. If you want to know more information please contact us. Our responsible, experienced technical team is always ready to serve and guide you at any time.